How to Use Chalk Paint _ You can use chalk paint on pretty much any surface, keeping these things in mind: Chalk paint is fairly thick, which means you don't have to sand or prime beforehand. This saves hours of prep work, especially when you are doing a big project like kitchen cabinets. (Although no sanding is required, you might want to wipe them down, however, especially if there's grease or residue buildup.) Paint as you would with ordinary paint to cover the surface. Chalk paint usually has less drips, and is quick to dry, often needing only an hour in between coats. Use your technique of choice to get a layered or distressed finish, or go for a solid opaque look. To seal the surface, apply two to three coats of wax after you've finished painting. When you need to touch up later, just use the same paint to cover up any spots or scratches, then wax right over it again. As long as you use the same color, you'll never know the difference. (Just save a little bit of any custom_blended paint so you don't have to try to color match the second time around.) Since this paint is water_based, clean up is easy and the same as latex paint.
Covering the Basics _ Now before I get into the comparison, I want to start with sharing a few basics about both paints in case you’re not familiar with chalk paint. Both the Annie Sloan chalk paint and the Rust_Oleum version allow for minimal prep work. No sanding is required, no primer needed. You just grab your piece of furniture and start painting. Both can be applied to a variety of surfaces, such as wood, glass, metal, ceramic, and even plastic. Both can be easily distressed for a vintage look. Both are low_odor and easy to clean up. Both are supposed to dry in a matte finish. The Annie Sloan chalk paint retails for า for 32 oz and can generally only be purchased at a painting boutique or shop. The Rust_Oleum chalk paint retails for มቋ for 30 oz and can be purchased on Amazon, as well as many home improvement stores.
by Valerie K. Pettis on Aug 10, 2018 Chalk Paint