Thoughts After Two Coats of Paint _ Both sides dried completely in about 20 minutes and were ready for the second coat. I found the second coat of Annie Sloan paint a little harder to apply compared to the Rust_Oleum paint. I think the difference was largely due to the fact that I was painting on such a dry, matte surface from that first coat. The second coat seemed to cake up for me a bit, which I have experienced in the past with Annie Sloan paint. If you look closely you can see how it caked up in the top photo above. Since the Rust_Oleum paint dried in a more semi_matte, smooth finish I found it a lot easier to apply the second coat. The Annie Sloan paint seemed to offer a bit more coverage on the second coat. Both covered the damage/scuffs on the table really well. I was able to easily distress each with sandpaper for a vintage look.
How to Use Chalk Paint _ You can use chalk paint on pretty much any surface, keeping these things in mind: Chalk paint is fairly thick, which means you don't have to sand or prime beforehand. This saves hours of prep work, especially when you are doing a big project like kitchen cabinets. (Although no sanding is required, you might want to wipe them down, however, especially if there's grease or residue buildup.) Paint as you would with ordinary paint to cover the surface. Chalk paint usually has less drips, and is quick to dry, often needing only an hour in between coats. Use your technique of choice to get a layered or distressed finish, or go for a solid opaque look. To seal the surface, apply two to three coats of wax after you've finished painting. When you need to touch up later, just use the same paint to cover up any spots or scratches, then wax right over it again. As long as you use the same color, you'll never know the difference. (Just save a little bit of any custom_blended paint so you don't have to try to color match the second time around.) Since this paint is water_based, clean up is easy and the same as latex paint.
by Valerie K. Pettis on Aug 22, 2018 Chalk Paint