Thoughts After Two Coats of Paint _ Both sides dried completely in about 20 minutes and were ready for the second coat. I found the second coat of Annie Sloan paint a little harder to apply compared to the Rust_Oleum paint. I think the difference was largely due to the fact that I was painting on such a dry, matte surface from that first coat. The second coat seemed to cake up for me a bit, which I have experienced in the past with Annie Sloan paint. If you look closely you can see how it caked up in the top photo above. Since the Rust_Oleum paint dried in a more semi_matte, smooth finish I found it a lot easier to apply the second coat. The Annie Sloan paint seemed to offer a bit more coverage on the second coat. Both covered the damage/scuffs on the table really well. I was able to easily distress each with sandpaper for a vintage look.
Okie dokie. Let’s do this comparison! Here’s the table I used for this project. I chose this one because of its dark finish and the fact that there’s some damage on the top. I wanted to see how well these paints would cover the scuffs and markings. I used the Annie Sloan paint in Old White and the Rust_Oleum paint in Linen White. I applied both with a regular paint brush.
by Mark M. Rhodes on Aug 22, 2018 Chalk Paint